autocad file problem

how can I fix this error in AutoCAD"

"FATAL ERROR e06d7363h exception at 7592c41fh"

Guide below must help you, if not you may always use useful threads below from Internet space, ultimate solution will help you only in case your AutoCAD file is seriously damaged

http://www.cadtutor....ll=1#post613240

http://board.flashki...l=1#post4322193

https://onlinefilere...air-online.html

1. Go to Tools --> Options
2. Inside Options go to the “Files” Tab (far left)
3. Inside the files tab go to: “Automatic Save File Location” and see where the autosave files are stored. (mine where stored at C:\Documents and Settings\USERNAME\Local Settings\Temp)
4. Then access that folder and try to find a file with the same file name but different extension. (The autosave files should have a either a .BAK or a .SV$ extension) (if you can’t see the folder, you need to go to Tools --> folder Options --> View --> and Make sure "show hidden files and folders" is SELECTED) .
5. Check the "date modified" of those files, if the date and time makes sense according to when you had the last file crshes, there is a good chance that those files contain the information you need, so there is no need to redraw everything.
6. Change the file extension of the file you think it might be the good one from .bak or .sv$ to .dwg (to be able to change the file extension you need to be able to see it. To do that, on any folder go to Tools --> Folder Options --> View --> and make sure that "Hide extensions for known file types" is UNCHECKED)

If your auto-save feature is disabled, you can enable it in AutoCAD by going to Tools --> Options --> "Open and Save" Tab --> and there make sure that the "Automatic save" on the lower left corner is active and preferably set to every 10 minutes or less. To easily change the time of the autosave feature, use the SAVETIME system variable.

I am designing the planning of hvac installation unit in one of the commercial building. But when I am saving the file, it shows me error. What should be done to eradicate this error ? Please also browse this site.

Hi peteracannon, maybe your file is too big or complicated and couldn't be saved. Are you making it in 3d? Be carefull - if it's too big it may allow you to save it and never open again.

Though out of my depth on this, you might try importing the .dwg file into Illustrator as a last resort.